CPU 226
24V DC power supply
24V DC input
24V DC output 6ES7 216-2AD23-0XB0
100 ~ 230V AC power
24V DC input
Relay output 6ES7 216-2BD23-0XB0
CPU 226 Technical Data
Description CPU 226 DC / DC / DC CPU 226 AC / DC / Relay
Physical Characteristics
Dimensions (W X H X D)
Weight
Power 196 x 80 x 62 mm
 550 g
 11 W 196 x 80 x 62 mm
 660 g
 17 W
Memory Features
Program Memory
When the online program editing
Offline editing program
Data Memory
Equipment (super capacitor)

(Optional battery)
16384 bytes
 24576 bytes
10240 bytes
100 hours / typical value (40 ° C at least 70 hours)
 200 days / typ.
16384 bytes
 24576 bytes
10240 bytes
100 hours / typical value (40 ° C at least 70 hours)
 200 days / typ.
I / O Features
The local digital input
The local digital output
Native analog input
The analog output unit
Digital I / O image area
Analog I / O image area
It allows for maximum expansion I / O modules
Maximum allowable intelligence module
Pulse catch input
High-speed counter
    Total
    Single-phase counter
    2-phase counter
Pulse output 24 input
16 Output
No
No
256 (128 input / 128 output)
64 (32 inputs / 32 outputs)
7 module
7 module
twenty four

6
6, each 30KHz
4, each 20KHz
2 20KHz (only DC output) 24 Input
16 Output
No
No
256 (128 input / 128 output)
64 (32 inputs / 32 outputs)
7 module
7 module

twenty four
6
6, each 30KHz
4, each 20KHz
2 20KHz (only DC output)
General Characteristics
The total number of timer
    1ms
    10ms
100ms
Total counter

Bit internal memory retentive

Time interrupt
Edge interrupt
Analog potentiometer
Boolean execution time
Clock
Cards Options 256
4
16
236
256 (by the super capacitor or battery backup)
256 (by the super capacitor or battery backup)
112 (stored in EEPROM)
2 1ms resolution
4 rising and / or falling 4 2 8-bit resolution
0.22μs
Internal
Memory and battery cards 256
4
16
236
256 (by the super capacitor or battery backup)
256 (by the super capacitor or battery backup)
112 (stored in EEPROM)
2 1ms resolution
4 rising and / or falling 4 2 8-bit resolution
0.22μs
Internal
Memory and battery cards
Integrated communication
Interface
PPI / T Baud Rate
Free port baud rate
The maximum cable length per segment

The maximum number of sites

The maximum number of stations main
Point (PPI master mode)
MPI connecting two RS-485 interfaces
9.6, 19.2 and 187.5kbaud
1.2kbaud to 115.2kbaud
Isolation repeaters: 187.5kbaud up to 1000 meters, 38.4kbaud up to 1200 meters
Not Isolated repeater: 50 m
Each 32 stations per network 126 stations
32
Is (NETR / NETW)
A total of four, two reserved
(1 for PG, 1 Ge to OP) 2 Ge RS-485 interface
9.6, 19.2 and 187.5kbaud
1.2kbaud to 115.2kbaud
Isolation repeaters: 187.5kbaud up to 1000 meters, 38.4kbaud up to 1200 meters
Not Isolated repeater: 50 m
Each 32 stations per network 126 stations
32
Is (NETR / NETW)
A total of four, two reserved
(1 for PG, 1 Ge to OP)
Power features
Input Power
Input voltage
Input Current

Inrush current
Isolation (field side to logic)
Retention time (down)
Insurance (non-replaceable) 20.4 28.8 VDC Zhi
150mA (only CPU, 24 VDC)
1050mA (maximum load, 24 VDC)

12A, 28.8 VDC when
Not isolated
10ms, 24 VDC when
3A, 250 V Slow Blow when 85 Zhi 264 VAC (47 Zhi 63 Hz)
80 / 40mA (only CPU, 120/240 VAC)
320 / 160mA (maximum load, 120/240 VAC)
20A, 264 VAC when
1500 VAC
 20 / 80ms, 120/240 VAC when
 2A, 250 V when Slow Blow
24 VDC sensor supply
Sensor voltage
Current limit
Ripple noise
Isolation (sensors and logic) L + 5V Save
1.5A peak, non-destructive Terminal Limited
From the input power source
20.4 28.8 VDC non-isolated Zhi
1.5A peak, non-destructive Terminal Limited
Less than 1 V peak value
Non-Isolated
Digital input characteristics
Native integrated digital input points
Input Type

Rated voltage
Maximum continuous allowable voltage
Surge
A logic 1 signal (minimum)
A logic 0 signal (maximum)
Input Delay
Sensor connection 2-wire proximity switches (Bero)
Maximum allowed leakage current
Isolation (field side to logic)
Optical isolation
Isolation Group
High-speed input rate
High-speed counter logic 1 = 15 - 30 VDC
High-speed counter logic 1 = 15 - 26 VDC
Turned on simultaneously input
Maximum cable length
Shield

Unshielded 24 Input
Sink / Source (IEC Type 1 / sink)
24 VDC, 4mA typ.
30V DC
35V DC, 0.5 Miao
15 VDC, 2.5mA
 5 VDC, 1mA
Optional (0.2 to 12.8ms)

1mA

Yes
500 VAC, 1 Fenzhong
See the wiring diagram

20KHz (single phase), 10KHz (two-phase)
30KHz (single phase), 20KHz (two-phase)
All

500 m (standard input)
50 m (high-speed counter inputs)
300 m (standard input) 24 Input
Sink / Source (IEC Type 1 / sink)
24 VDC, 4mA typ.
30V DC
35V DC, 0.5 Miao
15 VDC, 2.5mA
 5 VDC, 1mA
Optional (0.2 to 12.8ms)

1mA

Yes
500 VAC, 1 Fenzhong
See the wiring diagram

20KHz (single phase), 10KHz (two-phase)
30KHz (single phase), 20KHz (two-phase)
All

500 m (standard input)
50 m (high-speed counter inputs)
300 m (standard input)
Digital output characteristics
Native integrated digital output points
Output Type
Rated voltage
voltage range
Surge Current (max)
Logic 1 (minimum)
A logic 0 (max)
Rated current per point (maximum)
Per common rated current (maximum)
Leakage current (maximum)
Lamp load (maximum)
Inductive clamping voltage
ON resistance (contact)
Isolation
Optical isolation (the scene to isolate)
Logic to contacts
Resistance (logic to the contact)
16 output isolation group
Solid state - MOSFET (Source)
24 VDC
20.4 28.8 VDC Zhi
8A, 100ms
20 VDC, maximum current
0.1 VDC, 10KΩ load
0.75A
6 A

10mA
5 W
Save L + 48 VDC, 1W power consumption
0.3 Ω typical value (0.6Ω max)

500 VAC, 1 Fenzhong
-
-
See wiring diagram output 16
Dry Contact
24VDC or 250VAC
5 or 5 to 30V DC to 250V AC
5A, 4s (10% rate when working)
-
-
2.0A
10A

-
30 W DC; 200 W AC
-
0.2 Ω (maximum value when new)

-
1500 VAC, 1 Fenzhong
100 MΩ
See the wiring diagram
Delay (max)
OFF to ON

ON to OFF

Switching
Pulse frequency (maximum)
Mechanical life cycle
Contact Life
At the same time the output is switched

Two outputs in parallel
Cable length (maximum)
Shield
Unshielded
2μs (Q0.0, Q0.1), 15μs (other)
10μs (Q0.0, Q0.1), 130μs (other)
-
20KHz (Q0.0 and Q0.1)
-
-
55 ° C when all outputs (horizontal installation)
45 ° C, all of the output (vertical installation)
Is output only when the same group

500 meters
150 meters
-
-

10ms
1Hz
10,000,000 (no-load)
100,000 (nominal load)
55 ° C when all outputs (horizontal)
45 ° C, all of the output (vertical)
no

500 meters
150 meters

上一篇：没有了

下一篇：6ES7216-2AD23-0XB0CPU