6SN1118-0DM
update£º2016-04-27 23:36 Click£ºtimes
- brand
- model
- describe
The encoder can use an incremental encoder sin/cos 1 VPP and EnDat absolute coding Direct measurement system. The dynamic measuring circuit switching between the measuring system and the direct measuring system Synchronous feed shaft (Long
introduce
The encoder can use an incremental encoder sin/cos 1 VPP and EnDat absolute coding
Direct measurement system.
The dynamic measuring circuit switching between the measuring system and the direct measuring system
Synchronous feed shaft (Longmen)
Fixed end stop for spindle and feed shaft
Variable incremental weight, 8 block speed
A C feed shaft using an encoder
Torque control
Weight balance
On line measurement
Through the PLC spindle swing
Asynchronous motor running without encoder
4 optional data sets for both synchronous and asynchronous motors
Brake management, depending on the controller enable and disable the pulse
Active feedback induction, encoder signal likelihood check
Encoder fault controlled parking
Advanced position control (APC), high dynamic positioning
Security integration of internal pulse suppression with drive bus
1PM/1PH/1FE1/2SP1/1FT6/1FK/1FN/1FW6 motor in a dual axis control
Mixed operation on a manufacturing cell
The available function depends on the 810D powerline/840D powerline SINUMERIK
Driver software version.
The operation of the high standard / high performance control system requires 6.0409 or more NC software.
Version, as well as HMI software version 6.02 and above.
The software support:
In the same drive group and the previous module mixed operation.
Use HMI or debugging tool NC SinuCom to carry out the module debugging.
High standard closed loop control, biaxial type
Controller with digital interface for
1FE1/2SP1/1PH/1PM 1FT6/1FK/
6SN11 18-0DM3 - -0AA0 motor
High performance close loop control, single axis type
Controller with digital interface for
1FT6/1FK/1FN/1FE1/2SP1/1PH/
1PM/1FW6 6SN11 18-0DJ2 - -0AA1 motor
High performance close loop control, biaxial type
Controller with digital interface for
1FT6/1FK/1FN/1FE1/2SP1/1PH/
1PM/1FW6 motor
6SN11 18-0DK2 - -0AA1
ÉÏһƪ£ºSNUMERIK 810D
ÏÂһƪ£º6SN1112-1AC01-0AA1
more
